When a connected device does not support the copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output.Check the setup of a device connected via an HDMI cable if the image is poor or the sound does not come out of the device. Audio signals (format, sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected device.Sound may not be output from the receiver while the home menu is displayed on the TV screen.Premium High Speed HDMI Cable with Ethernet is required for 4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit etc. Be sure to use a High Speed HDMI Cable with Ethernet when you view images or listen to sound, especially for 1080p, Deep Color (Deep Colour), 4K or 3D transmission.Refer to the operating instructions supplied with each device. The HDMI settings of some playback devices need to be configured.Check that the device is correctly connected to the corresponding HDMI jack.Check that the cable(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the device.Check that the device is correctly connected to the corresponding audio input jacks.Please help with some troubleshooting suggestions for this problem that don’t involve purchasing more AV hardware. but I really am not interested in spending $100 to solve this problem, or to find out that it doesn’t solve the problem anyway. The only suggestion I have found but not tried is this one: l.
ONKYO RECEIVER RADIO MODE NO SOUND 1080P
The current setup is to use a resolution of 1080p with a 60Hz refresh rate, and stereo audio configuration. Apple TV resolution and audio configuration I have tried changing the resolution and refresh rate on the Apple TV and changing the audio configration to different settings, but no setting change has made any difference. The normal listening mode that has worked for the last 4 years or so is stereo. I have cycled through all the different modes with the same results. Onkyo Listening Mode The Onkyo has a number of different listening modes, some Dolby, some not. No matter what the power-on order is, I never get sound to my speakers when the ATV is connected to the amp. Initialization Order: I’ve tried all permutations of tv/amp/ATV power on sequencing, and it makes no difference. Regardless of the cable used to connect from the ATV to the amplifier, when connected through the amplifier I get no sound. Regardless of the cable I use, when connected directly to the television, I get video and sound. Here is what I have tried: Cables Switching through all the hdmi cables I own using direct connections from the ATV to the television to verify that there are no cable issues. I purchased the ATV4 shortly after it was released, and had a 2nd generation before that. I have owned an Apple TV for years in this same configuration with a different television and have never had this problem for that entire time. When I connect the ATV hdmi cable directly to the tv I get video and sound. The symptom is that I get video from the ATV displayed on the television, but there is no audio coming out of the amplifier to the speakers. The television is new, and this problem developed after about a week of use with the new television. I have stereo speakers and the Onkyo and ATV are both configured for stereo sound, not Dolby. I have an Apple TV 4 connected via hdmi out to an hdmi input on an Onkyo TX-SR605, whose hdmi Out is connected to one of the hdmi inputs on a Vizio E70-E3 tv.
0 kommentar(er)
